Axial AX10 Crawler

This was my Crawler I built and ran in Competitions.
I ran this in the Sportsman class and won MANY comps with it, and was built to run in the Comp class, so the Dig unit had to be removed
to run in that, and is easily put back in if needed.
It has the DNA Dig (of which I have had a LOT of parts made so it works EXCELLENT, with Digital servo to Stay where it should be)
It has the Mayhem Double Phatty Wheels with the 5/8" Bearings to adjust weight the way you want it, and I have a set in the rear
that are made of Delrin to make them lighter, and do a LOT better job that way as you don't need the weight in the rear.
Running a Holmes 7T Colbalt Puller motor in here, with a Mamba Max Speed Controller, of which you can use on Brushed or
Brushless Motors, but in this case it is a Brushed Motor
Has custom made Delrin Skid that moves the motor and transmission closer to the center, and moves it forward for more weight
transfer to the front.
CVD's in the front with Aluminum "C" Hubs, and Steering knuckles, and Custom made Aluminum Behind the Axle Steering with
bearings to make it super smooth.
ALL parts have been upgraded or replaced as I found needed and to be stronger, and to win each event.

I had a lot of fun with this truck, only reason I am selling is I am in a wheelchair, and the local place where we ran them inside stopped,
 and I can't go to outside events, as I can't get to them, SO, somebody is going to get a heck of a deal here.

All that is needed to make this run is your Receiver and radio.
3 channels works best to control the Dig, as then you can have a Locked rear and a Free Wheel, of which really helps when you want
to pull up a hill and move the truck around.
It will run now on only a 2 channel radio if you don't have the dig installed.

Higher gearing in the Front Diff then rear to make it pull a bit better

This Truck is going to weigh a LOT to ship, as it has the weighted Front wheels with bearings and another set of wheels that are weighted

Asking $375 for EVERYTHING

I am sure there are things that slipped my mind when making this up, but there is a LOT in this deal.
Below is a list of some of the things I can remember that it comes with.

-Axial Highly Modified Crawler
-Mayhem Double Phatty Wheels with bearings for weight adjustment
-Rear Delrin Wheels for lighter weight
-Crawler Inovations Double Deuce Nova Foams
-Hot Bodies Rover Tires
-Proline M2 Hammer tires with memory foams, mounted on 8 hole wheels
-Front wheels have 2 full wraps of weights in the Hammers
-MIP CVDs in front
-MIP Driveshafts of different sizes, depending if you are running Dig
-DNA Dig unit with parts machined to make it run SMOOTH  and durable
-Losi Shocks with different spring combos to make it work well
-Custom made Battery mount for rear.
-Castle BEC to run servo at a GOOD 6 volts
-HiTec HS-7955MG Digital Steering Servo 333 oz. in.
-HiTec HS-5245MG Digital Mighty Mini Servo For the Dig Unit
-Holmes 7 Turn Colbalt Puller Motor
-Castle Mamba Max Speed Controller
-Delrin Center Skid
-Aluminum C Hubs and Steering knuckles
-Behind the Axle Steering custom made with Bearing inserts to make it SMOOTH and not bind
-Two 2200 Mah 25c 2s1P 2S Batteries that make it run strong when you need punch
-Stock ring and pinion to put back same as rear
-Lot of different links to adjust to your taste
-Stock unused shocks, plus many other parts
-Anything I find before shipping I will throw in also

(Click on pictures below  to make large)